Q.Max - Sheet Metal Punch 1.3/4in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

All punches boxed singly without key, which should be ordered separately.

To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

£31.05 £25.87
  • Buy 3 for £27.15 £22.62 each and save 13%
  • Buy 6 for £26.51 £22.09 each and save 15%
  • Buy 12 for £25.58 £21.32 each and save 18%

AvailabilityIn stock

Details

Size. 1 3/4 in.
Key Type.B. 5/16 in hexagonal wrench

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

All punches boxed singly without key, which should be ordered separately.

To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

More Information
More Information
BrandQ.Max
ClassificationPunches
Part NumberQMA-1.3/4IN
Barcode Number93
Dimensions0 x 0 x 0 mm
Reviews
Write Your Own Review
You're reviewing:Q.Max - Sheet Metal Punch 1.3/4in
Your Rating